New release

Home Forums Autosense General Discussion New release

This topic contains 23 replies, has 0 voices, and was last updated by Profile photo of Eric Eric 4 years, 12 months ago.

Viewing 10 posts - 16 through 25 (of 25 total)
  • Author
    Posts
  • #214
    Profile photo of that_kid
    that_kid
    Participant

    Yes it discovered my duemilanove. I tried setting up a couple of pins but nothing happened on the Arduino side. I’m not sure how much was implemented beyound detection

    #216
    Profile photo of -Jeff-
    -Jeff-
    Participant

    Windows says it is an FTDI

    Android shows
    6015:0403

    FT231X usb uart

    #217
    Profile photo of Eric
    Eric
    Keymaster

    Thanks Jeff. I’ll verify tonight I have those included

    #218
    Profile photo of Eric
    Eric
    Keymaster

    That seems to be the issue. I didn’t have that product ID. I’ll recompile and post a bit later.

    #219
    Profile photo of -Jeff-
    -Jeff-
    Participant

    @eric wrote:

    That seems to be the issue. I didn’t have that product ID. I’ll recompile and post a bit later.

    Cool thanks

    #220
    Profile photo of Eric
    Eric
    Keymaster

    Ok, I’ve pushed the new build. The only thing changed is now including that product ID.

    #222
    Profile photo of -Jeff-
    -Jeff-
    Participant

    It detects it, but it still does not show a diagram or io connections

    Do I need to erase the code I put on it? I bought the basic starter kit so the first starter project is on the board

    #223
    Profile photo of Eric
    Eric
    Keymaster

    Right now it should detect it regardless of the code that is on the Redboard.
    I don’t currently have the self programming working, that is coming in the next little while. But Autosense should see the device, and under Settings/Arduino/Master IO, the i

    #224
    Profile photo of -Jeff-
    -Jeff-
    Participant

    Ok, like I said this is not the tablet that will be used, but it should work on it I would think

    #225
    Profile photo of Eric
    Eric
    Keymaster

    Any tablet that supports OTG it should work with.

  • Author
    Posts
  • #214
    Profile photo of that_kid
    that_kid
    Participant
    • Offline

    Yes it discovered my duemilanove. I tried setting up a couple of pins but nothing happened on the Arduino side. I’m not sure how much was implemented beyound detection

    #216
    Profile photo of -Jeff-
    -Jeff-
    Participant
    • Offline

    Windows says it is an FTDI

    Android shows
    6015:0403

    FT231X usb uart

    #217
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Thanks Jeff. I’ll verify tonight I have those included

    #218
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    That seems to be the issue. I didn’t have that product ID. I’ll recompile and post a bit later.

    #219
    Profile photo of -Jeff-
    -Jeff-
    Participant
    • Offline

    @eric wrote:

    That seems to be the issue. I didn’t have that product ID. I’ll recompile and post a bit later.

    Cool thanks

    #220
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Ok, I’ve pushed the new build. The only thing changed is now including that product ID.

    #222
    Profile photo of -Jeff-
    -Jeff-
    Participant
    • Offline

    It detects it, but it still does not show a diagram or io connections

    Do I need to erase the code I put on it? I bought the basic starter kit so the first starter project is on the board

    #223
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Right now it should detect it regardless of the code that is on the Redboard.
    I don’t currently have the self programming working, that is coming in the next little while. But Autosense should see the device, and under Settings/Arduino/Master IO, the i

    #224
    Profile photo of -Jeff-
    -Jeff-
    Participant
    • Offline

    Ok, like I said this is not the tablet that will be used, but it should work on it I would think

    #225
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Any tablet that supports OTG it should work with.

Viewing 10 posts - 16 through 25 (of 25 total)

You must be logged in to reply to this topic.