Rotary encoder

Home Forums Hardware UDOO Rotary encoder

This topic contains 9 replies, has 2 voices, and was last updated by Profile photo of Eric Eric 1 year, 10 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #2098
    Profile photo of idorel77
    idorel77
    Participant

    Hi Eric ,
    can i use a rotary encoder on udoo for volume control?

    I have something like this :http://www.miniinthebox.com/ro/5-pini-encoder-rotativ-cu-privire-comutator_p381444.html

    If yes , can you give me some intruction.

    #2099
    Profile photo of Eric
    Eric
    Keymaster

    Hi,
    Currently I have no support for rotary encoders. Although it’s something I should add. I however don’t have one to test with.

    #2100
    Profile photo of idorel77
    idorel77
    Participant

    Ok , thanks Eric.
    If you will add some modifications in this direction i will glad to test.

    #2153
    Profile photo of Eric
    Eric
    Keymaster

    Were you wanting the rotary encode for volume control or something else?
    I’ve started planning for support on the next version of the shield. It will also work with the existing version, or no shield, but will require you do manually hook things up.

    #2176
    Profile photo of idorel77
    idorel77
    Participant

    Hi Eric,
    yes i whant rontary encoder for volume control.
    I can hook manualy , is not problem. But i will need some indications.

    #2177
    Profile photo of Eric
    Eric
    Keymaster

    Ok. When the time comes and I get an encoder, I’ll let you know the wiring.

    #2616
    Profile photo of idorel77
    idorel77
    Participant

    Any news about the encoder?

    #2618
    Profile photo of Eric
    Eric
    Keymaster

    I’ve begun coding for one but I can’t test it because I don’t have one. It’s still being either on.

    #2621
    Profile photo of idorel77
    idorel77
    Participant

    I have 2 , but i think i have to pay more for shipping than you bay one :).

     

    I can test if you tell me how to setup.

    #2624
    Profile photo of Eric
    Eric
    Keymaster

    Yeah I’m sure shipping from your place to mine would be expensive.  Next time I place an order for hardware I’ll try to remember to order one.  Unless one falls onto my desk some other way 😉

  • Author
    Posts
  • #2098
    Profile photo of idorel77
    idorel77
    Participant
    • Offline

    Hi Eric ,
    can i use a rotary encoder on udoo for volume control?

    I have something like this :http://www.miniinthebox.com/ro/5-pini-encoder-rotativ-cu-privire-comutator_p381444.html

    If yes , can you give me some intruction.

    #2099
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Hi,
    Currently I have no support for rotary encoders. Although it’s something I should add. I however don’t have one to test with.

    #2100
    Profile photo of idorel77
    idorel77
    Participant
    • Offline

    Ok , thanks Eric.
    If you will add some modifications in this direction i will glad to test.

    #2153
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Were you wanting the rotary encode for volume control or something else?
    I’ve started planning for support on the next version of the shield. It will also work with the existing version, or no shield, but will require you do manually hook things up.

    #2176
    Profile photo of idorel77
    idorel77
    Participant
    • Offline

    Hi Eric,
    yes i whant rontary encoder for volume control.
    I can hook manualy , is not problem. But i will need some indications.

    #2177
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Ok. When the time comes and I get an encoder, I’ll let you know the wiring.

    #2616
    Profile photo of idorel77
    idorel77
    Participant
    • Offline

    Any news about the encoder?

    #2618
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    I’ve begun coding for one but I can’t test it because I don’t have one. It’s still being either on.

    #2621
    Profile photo of idorel77
    idorel77
    Participant
    • Offline

    I have 2 , but i think i have to pay more for shipping than you bay one :).

     

    I can test if you tell me how to setup.

    #2624
    Profile photo of Eric
    Eric
    Keymaster
    • Offline

    Yeah I’m sure shipping from your place to mine would be expensive.  Next time I place an order for hardware I’ll try to remember to order one.  Unless one falls onto my desk some other way 😉

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.