Home › Forums › Software › Suggestions › Suggestion on autosense launch
This topic contains 7 replies, has 0 voices, and was last updated by Eric 3 years, 4 months ago.
-
AuthorPosts
-
November 24, 2014 at 3:32 am #127
Eric,
I forgot that the App will auto launch with the Arduino plugged in. is there a way to not allow that to happen?
I have a unique issue where when it auto launches on my App Radio and Android Stick, then the app to connect the radio to the stick nev
November 24, 2014 at 6:01 am #403The auto launch is a feature of the Android system. Because the Arduino is presenting itself as an Android accessory, Android assumes you want to do something with it, think like a dock would.
If you leave the Arduino plugged in, does it do the same thiNovember 24, 2014 at 6:11 am #404Just tried and it doesn’t work. Built into the Arduino firmware is code to alert the Android system that it has been connected, and even if Autosense doesn’t do anything with the device, the Android system will still alert you that something has happened
November 24, 2014 at 1:16 pm #405That explains a lot actually..
So I know we need to select the right program when the Arduino is connected, which means my plan for the the App Radio and external devices might not work.. May have to rethink my plans for the radio in the car
November 25, 2014 at 2:32 am #406Can you send a link to the hardware you have?
You have more than one FTDI based device connected right? What exactly are you trying to do?
I’ve had to rethink my plans many timesNovember 25, 2014 at 3:46 am #408SO I want the perfect solution.. LMAO
Here is what Had in my car:
HD Tuner (Serial)
ALDLDroid (Serial)
Nexus 7 tabletI did not like a few things with the tablet install.. mainly was the fit of the bezel and the tight area i have to work
I am using an
November 25, 2014 at 4:01 am #409I too want the perfect solution… that’s why I started building this thing to begin with 😉
I too had issues with the tablet, that’s why I’m currently fighting with tNovember 25, 2014 at 4:34 am #410November 25, 2014 at 5:53 am #412Thanks Jeff, that looks like a cool solution.
AuthorPosts-
AuthorPosts
-
Eric,
I forgot that the App will auto launch with the Arduino plugged in. is there a way to not allow that to happen?
I have a unique issue where when it auto launches on my App Radio and Android Stick, then the app to connect the radio to the stick nev
The auto launch is a feature of the Android system. Because the Arduino is presenting itself as an Android accessory, Android assumes you want to do something with it, think like a dock would.
If you leave the Arduino plugged in, does it do the same thiJust tried and it doesn’t work. Built into the Arduino firmware is code to alert the Android system that it has been connected, and even if Autosense doesn’t do anything with the device, the Android system will still alert you that something has happened
That explains a lot actually..
So I know we need to select the right program when the Arduino is connected, which means my plan for the the App Radio and external devices might not work.. May have to rethink my plans for the radio in the car
Can you send a link to the hardware you have?
You have more than one FTDI based device connected right? What exactly are you trying to do?
I’ve had to rethink my plans many timesSO I want the perfect solution.. LMAO
Here is what Had in my car:
HD Tuner (Serial)
ALDLDroid (Serial)
Nexus 7 tabletI did not like a few things with the tablet install.. mainly was the fit of the bezel and the tight area i have to work
I am using an
I too want the perfect solution… that’s why I started building this thing to begin with 😉
I too had issues with the tablet, that’s why I’m currently fighting with tThanks Jeff, that looks like a cool solution.
AuthorPostsViewing 9 posts - 1 through 9 (of 9 total)The forum ‘Suggestions’ is closed to new topics and replies.